Due to the deep starting frequency of the MHT 12 8 OHM it is possible to make use of this magnetostat in the VOX 253 . Of course, the crossover has to be changed from that used in the original version with its KE 25 SC 8 OHM . Fortunately, the AL 130 8 OHM 's only have to be separated slightly higher which means we are still a long way from the baffle resonance levels. Here, too, the transfer frequency is 3000 Hz. As can be seen from the dotted frequency curves for the individual drivers, the AL 130 8 OHM drop off at 2000 Hz and the MHT 12 8 OHM at 4500 Hz and meet again at 3000 Hz and -6 dB. The magnetostat need not by any means produce its full output at 3000 Hz, as some people often believe. This would not make sense in terms of achieving the lowest possible distortion factor .

Since the front panel of the MHT 12 8 OHM is slightly larger, the AL 130 8 OHM 's have to be spaced a little further apart (10 mm).

As regards their sound quality, both versions (original VOX 253 with KE 25 SC and VOX 253 MHT ) are at the same high level. The version preferred by each particular customer will depend on personal taste, the type of music you listen to and how you listen.

Цената на всички тонколони е за пълен комплект, за чифт, без кутиите.

Кутиите се изработват от MDF според технологичните чертежи на VISATON и в желания от Вас цвят. Цената им се формира в зависимост от вида на покритието ( боя или фурнир ) и използвания лак и байц. При проявен интерес, можете да ги поръчате при нас, или да Ви предоставим технологичните чертежи на VISATON.

И все пак, не забравяйте да ни попитате дали има налични готови тонколони от модела, който сте избрали и в какъв цвят и покритие са те.