The VOX 253 MTI is the current highlight in the VOX series. The uncompromising approach, involving fitting the TI 100 8 Ohm as the low- to mid-range unit and the MHT 12 8 Ohm as the tweeter, worked highly successfully in the TOPAS . Following the basic design concept of the VOX series, this system is fitted with two TI 100 8 Ohm 's as low- to mid-range units and the TIW 250 XS 8 Ohm as the woofer.

One particularly convenient innovation is used for the first time in the VOX 253 MTI : it is now possible to tune the bass output level on the crossover unit. Depending on the acoustic properties of the room and personal preference, the bass output might be too strong, if the speakers are placed close to a wall, for example. The adjustment unit is mounted on the crossover unit directly parallel to the woofer and enables to listener to adjust the output level between 70 Hz and 150 Hz. The lower-frequency bass is not affected. Increasing the resistance affects the bass output: 10 ohms for a minimal reduction in bass and 3.3 ohms for maximum reduction. If the adjuster is left open (i.e. resistance is infinite), bass output reduction is deactivated.

Extract from Klang & Ton (VOX 252 MTI)

With their VOX 252 MTI, VISATON have, once again, created great results. This is not only the best VOX there has ever been, it is, in my opinion, the best sounding VISATON speaker of all. Ready-made speakers of this quality will often cost as much as 10,000 a pair. The DIY concept is definitely a winner here.

Цената на всички тонколони е за пълен комплект, за чифт, без кутиите.

Кутиите се изработват от MDF според технологичните чертежи на VISATON и в желания от Вас цвят. Цената им се формира в зависимост от вида на покритието ( боя или фурнир ) и използвания лак и байц. При проявен интерес, можете да ги поръчате при нас, или да Ви предоставим технологичните чертежи на VISATON.

И все пак, не забравяйте да ни попитате дали има налични готови тонколони от модела, който сте избрали и в какъв цвят и покритие са те.